Back to Back BRI using WIC-1B-S/T-V3

Hello Experts

I am setting up my lab using two 2901 routers which WS-C3560X-24P-L is running on 15.2 IOS.

I am trying to simulate a back to back BRI.

BRI Module: WIC-1B-S/T-V3 (x2) one of each router.

I followed this amazing document to understand the concept of BRI and configuration.

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a0080094cd6.shtml

but it never says if i can use the module that i have mentioned.

Q1. Could anyone explain what cabling i need to use to setup back to back BRI using 2x 2901 routers with these modules?

Q2. What cabling do i need to use.

Q3. Is it actually possible to use these 2 modules alone to simulate a back to back BRI..?

The supplier 3Anetwork.com can help but their technical support charge is a bit high, so I would prefer to do by myself.

Thanks for your help.

more information ,you can visit  http://www.3anetwork.com/cisco-ws-c3560x-24p-s-price_p51.html