Is it possible to config Cisco WS-C3750X-24T-L Price with
some http Html/Java software instead of cli ?
I am not very familiar with this switch.
If I understand correctly,
1. the 3750 is addressed at 10.0.10 .10.
2. You are able to telenet to that address
and manage the device from the console.
3. http://10.0.10 .10
results in a 404 error
If that is the case, you may want to perform
the troubleshooting steps outlined in the Getting Started Guide referenced
above, carefully following the procedures step by step.
Other things to try:
* Be sure that HTTP services are enabled
(which they should be by default). If
they're not you can login via console and enable the HTTP services :
c3750>enable
c3750#conf t
c3750(config)#ip http server
c3750(config)#exit
c3750#wr mem
l
Upgrade the operating software,
or if you've recently upgraded the operating software, you may want to be sure that
the upgrade was successful. The 3750s
are rumored to be picky about how they're upgraded and the gurus at the Cisco
Support Forum suggest upgrading with the ".tar" image and using the
"archive download-sw" command to do so. This has solved the problem for others, but I
can't speak from experience.
For more Cisco WS-C3750X-24T-S Price information please click here
没有评论:
发表评论